双稳态结构中的1/2次谐波共振及其对隔振特性的影响

以典型的双稳态系统——屈曲梁结构为例,基于等效模型,结合解析、数值和实验手段,研究了双稳态结构中的1/2次谐波共振特性、演化过程、参数调节规律及其对隔振特性的影响.研究发现,当非线性刚度系数或激励幅值增加到一定程度时,系统会在一定带宽下产生显著的1/2次谐波共振;随着激励幅值增加,阻尼系统的1/2次谐波遵循“产生-增强-衰退-消失”的过程,该过程对峰值频率和峰值传递率有重要影响;适当提高非线性强度能有效改善双稳态结构隔振特性.针对双稳态屈曲梁结构开展的实验验证了1/2次谐波特性和隔振特性变化规律.     

宽体液腔Janus-Helmholtz换能器

本文使用有限元方法对宽体液腔Janus-Helmholtz(JH)换能器进行了仿真分析,得出了壳体宽度拓展增量对JH换能器工作性能的影响规律。使用三维建模的方式,分析了连接部分对换能器性能的影响及宽体壳体的的模态,证明了三维建模的必要性。依据仿真优化结构设计了一款宽体液腔JH换能器并进行了湖上测试。最终测试结果与仿真结果有很好的一致性,相较直筒JH换能器其谐振频率降低300Hz,发射电压响应最高可达144dB。     

干式变压器有限元仿真模型的电磁和振动分析

随着电力需求的逐年增长,干式变压器的数量也在不断增加。干式变压器在运行时存在着振动和噪声的问题,为了对干式变压器振动的规律与特点进行研究,本文建立了干式变压器本体振动的有限元仿真模型,通过电磁分析获得相应的磁场分布,然后利用结构动力学分析得到其本体振动的相关规律。通过对处于运行状态的变压器振动数据进行实测分析,得到变压器振动的特征频率,然后对仿真结果进行对比分析,可以发现振动幅度与频率之间存在的关系。本文的研究结果可对干式变压器的减振降噪研究提供参考。     

Stabilization of a viscoelastic rotating Euler‐Bernoulli beam

In this paper, we consider a rotating Euler‐Bernoulli beam. The beam is made of a viscoelastic material, and it is subject to undesirable vibrations. Under a suitable control torque applied at the motor, we prove the arbitrary stabilization of the system for a large class of relaxation functions by using the multiplier method and some ideas introduced by Tatar (J. Math. Phys. 52:013502, 2011).     

接地式三要素型动力吸振器性能分析

利用固定点理论优化接地类型的动力吸振器得到的结果可能不是全局最优参数,在选择其他参数时主系统可以获得更小的振幅, 接地类型动力吸振器的优化问题值得进一步研究. 因此,以一种接地式三要素型动力吸振器为对象,通过研究系统参数变化对固 定点位置与主系统最大振幅的影响,得到了此吸振器的局部最优参数并分析了它的性能. 首先建立了此系统模型的运动微分方程, 得到了主系统振幅放大因子,发现系统存在3个与阻尼无关的固定点. 固定点中幅值较大点随系统参数变化的趋势可以代表最大振 幅随系统参数变化的趋势,因此利用盛金公式得到了固定点幅值的表达式. 为了更加精确,进一步使用数值算法得到了最大振幅与 系统参数的关系图,发现系统中存在局部最优参数. 通过对比接地式吸振器与接地三要素型吸振器的最大振幅随系统参数变化的趋 势,得到了接地式三要素型吸振器的局部最优参数,并发现当固有频率比小于局部最优频率比时,接地式三要素型吸振器模型主系 统的最大振幅要远小于接地式动力吸振器模型.      

On the analysis of vibration equation involving a fractional derivative with Mittag-Leffler law

The present article deals with a fractional extension of the vibration equation for very large membranes with distinct special cases. The fractional derivative is considered in Atangana-Baleanu sense. A numerical algorithm based on homotopic technique is employed to examine the fractional vibration equation. The stability analysis is conducted for the suggested scheme. The maple software package is utilized for numerical simulation. In order to illustrate the effects of space, time, and order of Atangana-Baleanu derivative on the displacement, the outcomes of this study are demonstrated graphically. The results revel that the Atangana-Baleanu fractional derivative is very efficient in describing vibrations in large membranes.     

田字形地震超材料甚低频宽带隙机理

在地球中传播的地震波主要有体波和表面波,而表面波中Rayleigh波对建筑物造成的破坏最为强烈。针对Rayleigh波的振动控制,提出一种田字形超材料结构。相比于传统的地震超材料,这种超材料屏障是由外部口字形框体内部嵌套十字形柱体组成,形成4个可填充区域,其外部框体采用部分埋入的方式,具有高强度、强稳定性、填充方式灵活的特点。应用有限元法计算了田字形超材料的能带结构和传输特性,并通过分析带隙边界处模态振型可知,带隙的打开是由于柱体的局域共振。结合带隙机理可知,柱体结构中土壤填充量不同可改变柱体的质量,形成不同的谐振频率,产生甚低频带隙。为进一步拓宽带隙,设计研究了正、负梯度的质量填充方式,均可得到3.3~13.1 Hz甚低频宽带隙,在谐振频率范围内两者的隔震方式分别为Rayleigh波彩虹捕获和Rayleigh波到体波的转化。最后,采用EI-Centro地震波对填充屏障进行了时程验证,加速度最大幅值衰减超过80%,为地震超材料在减震隔震方面应用提供了新的设计思路和方法。     

Dynamic Modeling of the Feed Drive System of a CNC Metal Cutting Machine

Studying the vibrational behavior of feed drive systems is important for enhancing the structural performance of computer numerical control (CNC) machines. The preload on the screw and nut position have a great influence on the vibration characteristics of the feed drive as two very important operational conditions. Rotational acceleration of the screw also affects the performance of the CNC feed drive when machining small parts. This paper investigates the influence of preload and nut position on the vibration characteristics of the feed drive system of a CNC metal cutting machine in order to be able to eliminate an observed resonance occurred at high rotational speeds of the screw, corresponding to high feed rates. Additionally, rational structural parameters of the feed drive system are selected in order to increase the rotational acceleration for improving the performance of the CNC machine. Experiments and analyses showed that by selecting specific parameters of feed drive system and simultaneously applying a certain value of preload, a 97% increase in rotational acceleration and 30% time reduction considering the vibration resistance at high rotational speeds can be achieved.     

石英晶体板非线性高频振动的拓展伽辽金法分析

针对考虑几何和材料非线性的石英晶体板厚度剪切振动和弯曲振动的方程组,利用扩展伽辽金法对该方程组进行转化和求解,分别获得了强烈耦合的厚度剪切振动模态和弯曲振动模态的频率响应关系,绘制了不同振幅比和不同驱动电压影响下的频率响应曲线图。数值计算结果表明可以选取石英晶片的最佳长厚比尺寸来避免两种模态的强烈耦合。驱动电压的变化将引起石英晶体谐振器厚度剪切振动频率的明显改变,必须将振动频率的漂移值控制在常用压电声波器件的允许值之内。扩展伽辽金法对石英晶体板非线性振动方程组的求解为非线性有限元分析和偏场效应分析奠定了基础。     

Error Estimates for Semi-Discrete and Fully Discrete Galerkin Finite Element Approximations of the General Linear Second-Order Hyperbolic Equation

In this article, we derive error estimates for the semi-discrete and fully discrete Galerkin approximations of a general linear second-order hyperbolic partial differential equation with general damping (which includes boundary damping). The results can be applied to a variety of cases (e.g. vibrating systems of linked elastic bodies). The results generalize pioneering work of Dupont and complement a recent article by Basson and Van Rensburg.